Analog Temperature Sensor

Connects to the Analog Input Port of the Cellocator Unit

The Analog Temperature Sensor can be connected to the analog input port of the Cellocator unit to provide a low-cost, easy to install solution for the cold chain transportation market.

Available in 5m and 20m lengths
Temperature range: -40ºC to +75ºC.
Maximum error range of ±2 ºC (when integrated with a Cellocator unit).
Weather-proof, supporting rapid thermal response to changing conditions.
No calibration is required.
Supports 12/24V power supply and has built-in protection against reverse polarity feed and electrical disturbances in the vehicle environment.

Specifications
Related Products
Applications

Supply Voltage:	Min: 8 Max: 31 Units: V
Continuous extended VDC supply:	Max: 80 Units: V
Supply Current:	Min: 0.6 @8V Max: 3.6 @31V Units: mA
Temperature range:	Min: -40 Max: +75 Units: °C
Output short-circuit current:	Max: 2.5 Units: mA
Maximum voltage on Vout:	Max: 2.5 Units: V
Temperature response gradient (depends on thermal conduction):	Max: 4 Units: ºC/Min
Measurement error:	Typical: ±1 Max: ±2 Units: ºC
Maximum short term (up to 200 microseconds) reverse voltage protection:	Max: 600 Units: V
Maximum Spikes as in load dump pulse:	Max: 100 Units: V
Temperature voltage output response:	Typical: 20 Units: mV/°C
Ingress Protection:	IP67

CR-300

The Cellocator CR300B is Cellocator’s entry-level unit for fleet management and vehicle security applications, available in 2G / 3G modem variants.

The CR300B is equipped with a rechargeable backup battery (1000mAh) and GSM jamming detection algorithms for improved compliance with vehicle security applications.

Learn More about CR-300

Cello-IQ

Advanced Fleet Management Solution with Driver Behavior Monitoring

Cello-IQ is a driver behavior monitoring and eco-driving device, designed to reduce fleet operating costs, improve productivity and increase fleet safety. The Cello-IQ processes and interprets vehicle dynamics and driving patterns into a safety score, which reflects the driver’s potential of involvement in a road accident, and an Eco score, indicating the vehicle’s fuel efficiency and emission footprint.

Learn More about Cello-IQ

Cello-CANiQ

Intelligent Fleet Management, Driver Behavior & Diagnostics Solution

A fleet management solution, utilizing a smart algorithm to combine data from various vehicle environment interfaces. These interfaces include standard CANBUS and OBD, driver identification, serial communication with third party devices, discrete, analog and frequency measurement ports, voice channel, and others. In addition to various logic methods calculating Trip Fuel Consumption, based on different vehicle’s parameters.

Learn More about Cello-CANiQ

CelloTrack (Power Variants)

The CelloTrack product line is designed for advanced asset tracking and remote monitoring, featuring enhanced functionality with full fleet management capabilities, robustness and ease of installation, suitable for a wide variety of asset management applications.

Learn More about CelloTrack (Power Variants)

Specs
Supply Voltage
Min: 8

Max: 31

Units: V
Continuous extended VDC supply
Max: 80

Units: V
Supply Current
Min: 0.6 @8V

Max: 3.6 @31V

Units: mA
Temperature range
Min: -40

Max: +75

Units: °C
Output short-circuit current
Max: 2.5

Units: mA
Maximum voltage on Vout
Max: 2.5

Units: V
Temperature response gradient (depends on thermal conduction)
Max: 4

Units: ºC/Min
Measurement error
Typical: ±1

Max: ±2

Units: ºC
Maximum short term (up to 200 microseconds) reverse voltage protection
Max: 600

Units: V
Maximum Spikes as in load dump pulse
Max: 100

Units: V
Temperature voltage output response
Typical: 20

Units: mV/°C
Ingress Protection
IP67
Accessories
- CR-300
  
  The Cellocator CR300B is Cellocator’s entry-level unit for fleet management and vehicle security applications, available in 2G / 3G modem variants.
  
  The CR300B is equipped with a rechargeable backup battery (1000mAh) and GSM jamming detection algorithms for improved compliance with vehicle security applications.
  Learn More about CR-300
- Cello-IQ
  
  Advanced Fleet Management Solution with Driver Behavior Monitoring
  
  Cello-IQ is a driver behavior monitoring and eco-driving device, designed to reduce fleet operating costs, improve productivity and increase fleet safety. The Cello-IQ processes and interprets vehicle dynamics and driving patterns into a safety score, which reflects the driver’s potential of involvement in a road accident, and an Eco score, indicating the vehicle’s fuel efficiency and emission footprint.
  Learn More about Cello-IQ
- Cello-CANiQ
  
  Intelligent Fleet Management, Driver Behavior & Diagnostics Solution
  
  A fleet management solution, utilizing a smart algorithm to combine data from various vehicle environment interfaces. These interfaces include standard CANBUS and OBD, driver identification, serial communication with third party devices, discrete, analog and frequency measurement ports, voice channel, and others. In addition to various logic methods calculating Trip Fuel Consumption, based on different vehicle’s parameters.
  Learn More about Cello-CANiQ
- CelloTrack (Power Variants)
  
  The CelloTrack product line is designed for advanced asset tracking and remote monitoring, featuring enhanced functionality with full fleet management capabilities, robustness and ease of installation, suitable for a wide variety of asset management applications.
  Learn More about CelloTrack (Power Variants)
Applications