MiniTrack from Cellocator

MiniTrack

Compact, Waterproof, Cost-Effective Fleet Management Device with BLE Connectivity

The MiniTrack is Cellocator’s cost-effective entry-level track & trace fleet management unit. The MiniTrack targets a wide range of market segments, including private and commercial vehicles as well as motorcycles and electric bikes.

  • 2G modem
  • Compact size
  • Supports GNSS (GPS, GLONASS)
  • BLE connectivity, supporting iDrive app –for driver ID and immobilizing
  • IP67 – suitable for rough, outdoor environmental conditions
  • Rechargeable backup battery
  • 2 multi-color LEDs for GSM/GPS signal indication, to ensure a quick & easy installation
  • Memory storage capability for 2.5K buffer messages
  • 3D accelerometer
  • Molded 10 wire harness
  • Efficient power management based on defined operational scenarios
  • Main functionalities:
    • Cell ID
    • Movement detection
    • Orientation change detection
    • Tampering detection
    • Crash detection
    • Towing detection
    • Geofence
    • Application FOTA
  • 5 digital IOs (2 inputs & 2 outputs & 1 ignition)
  • Certifications: CE(RED), E-mark, FCC
Communication  
GSM Modes: 2G:GPRS Class 10
Bands: 850, 900, 1800, 1900MHz
Power Output: GSM900/GSM850@class 4, GSM1800/GSM1900@class 1
SIM: Internal, replaceable; eSIM (HW readiness)
Antenna: Internal, Quad band GSM antenna
Packet Data: TCP/IP, UDP/IP
SMS: PDU
BLE: 4.1
GPS  
Technology: Integrated in BB Chipset
Sensitivity (Tracking): -163dBm
Acquisition (normal): Cold<35Sec, Hot<1Sec
Antenna: Internal (Ceramics GPS antenna)
Inputs & Outputs  
Inputs: 1 internally pulled down input dedicated for ignition switch
2 internally pulled up inputs with assignable functionality and configurable polarity
Outputs: 2 general purpose open drain outputs (250mA max) with assignable functionality
Accelerometer: 3D, 16g Max range, 12-bit representation, 1mg resolution (2g range)
Interfaces  
COM port: Baud rate 115000bps
TTL levels (external TTL-USB adaptor)
8 bit; 1 Stop bit, No Parity
Configuration update
Firmware upgrade
Harness: 10 Wire Integrated harness (Open wires)
Power  
Input Voltage: 9-32VDC
Average Current Consumption (12V): Hibernation: 1mA
Listen Mode with BLE: ~12mA (Depending on peeking intervals)
Tracking mode With BLE: ~27mA
Internal Battery: Li-Ion polymer, 3.7V, 80mAh, rechargeable
Embedded NTC for temperature controlled charging
Operating temperature: 0 (65% charge) to +45°C

Battery Monitoring: Temperature & Voltage
Autonomy: 48 messages from a fully charged battery at a TX rate of 1/5 minutes at room temperature
Protections: over current, overcharge and over discharge
Vehicle Environment Immunity  
Immunity: Compliant with ISO 7637 test level 1-4
Environment  
Temp, operating: -30°C to +70°C full performance
Temp, storage: -40°C to +85°C
Humidity: 95% non-condensing
Protection: IP67
Vibration, Impact: ISO 16750
Mounting: Tie-wraps and/or two-sided adhesive
Certifications  
FCC: Part 15 Subpart B, part 22/24 compliant
RED (CE): 2014/53/EU
E-mark: ECE R 10
IC: RSS-132,133,210 and ICES-003
Dimensions & Weight  
Dimensions: 90MMx34MMx13.8MM
Weight: 46.5G
  • Specs

    2G:GPRS Class 10

    850, 900, 1800, 1900MHz

    GSM900/GSM850@class 4, GSM1800/GSM1900@class 1

    Internal, replaceable; eSIM (HW readiness)

    Internal, Quad band GSM antenna

    TCP/IP, UDP/IP

    PDU

    4.1

    Integrated in BB Chipset

    -163dBm

    Cold<35Sec, Hot<1Sec

    Internal (Ceramics GPS antenna)

    1 internally pulled down input dedicated for ignition switch
    2 internally pulled up inputs with assignable functionality and configurable polarity

    2 general purpose open drain outputs (250mA max) with assignable functionality

    3D, 16g Max range, 12-bit representation, 1mg resolution (2g range)

    Baud rate 115000bps
    TTL levels (external TTL-USB adaptor)
    8 bit; 1 Stop bit, No Parity
    Configuration update
    Firmware upgrade

    10 Wire Integrated harness (Open wires)

    9-32VDC

    Hibernation: 1mA
    Listen Mode with BLE: ~12mA (Depending on peeking intervals)
    Tracking mode With BLE: ~27mA

    Li-Ion polymer, 3.7V, 80mAh, rechargeable
    Embedded NTC for temperature controlled charging
    Operating temperature: 0 (65% charge) to +45°C

    Battery Monitoring: Temperature & Voltage
    Autonomy: 48 messages from a fully charged battery at a TX rate of 1/5 minutes at room temperature
    Protections: over current, overcharge and over discharge

    Compliant with ISO 7637 test level 1-4

    -30°C to +70°C full performance

    -40°C to +85°C

    95% non-condensing

    IP67

    ISO 16750

    Tie-wraps and/or two-sided adhesive

    Part 15 Subpart B, part 22/24 compliant

    2014/53/EU

    ECE R 10

    RSS-132,133,210 and ICES-003

    90MMx34MMx13.8MM

    46.5G

  • Accessories
  • Applications
  • Relevant Documents
  • Knowledge Base

    Coming Soon