CelloTrack LTE

CelloTrack LTE

Advanced Asset Tracking and Wireless Monitoring Solution

The CelloTrack LTE product line is designed for advanced asset tracking with remote monitoring, that features enhanced functionality, robustness, and ease of installation, including wireless sensor connectivity (using the MultiSense or CelloSense).
The CelloTrack LTE is suitable for a wide variety of asset management applications that require a long operational life with or without a power source.
The CelloTrack product line is available in two variants – a standalone version and a power version, which includes extended battery life and the ability to connect external sensors via two configurable GPIOs.

 

CelloTrack Container Lock

A unique container tracking solution based on the CelloTrack and encased in a hardened enclosure, providing robust cargo monitoring with ease of installation and removal.

CelloTrack Seal

The CelloTrack Seal is based on the CelloTrack and is encased in a hardened enclosure. It uses a stainless steel electronic wire rope - available in different cable lengths - which can be quickly installed in virtually any type of truck, container trailer, tanker truck, warehouse, or critical zone doors.

The Seal detects the Lock´s opening, wire rope cutting, or tampering to generate alerts of any unauthorized intrusion attempts.

  • Based on LTE Cat 1 NA modem with 3G as a fallback network and LTE Cat 1 EU with 3G and 2G
    as fallback networks
  • Supports a Short-Range RF Wireless Sensor Network
  • GPS and GLONASS positioning for greater accuracy and more versatility
  • Rugged housing with IP67 rating
  • 3D accelerometer for movement and towing detection
  • MMI: programmable push button (on/off/test/panic) and two monitoring LEDs for GSM/GNSS status
  • ISO16750 compliance (shock, temperature, humidity, UV, chemical, salt)
  • Up to 100 built-in Geo-Fences
  • Supports OTA configuration and FW upgrades
  • Tampering detection mechanism to detect tampering of the device from the mounting surface
Communication  
Cellular communication: LTE Cat 1 NA with 3G Fallback
LTE NA: Bands 2, 4, 5, 12 (700, 850, 1700/2100 (AWS), 1900 MHz),
data rates: 10.2[DL] / 5.2[UL] Mbps
3G NA: UMTS Bands 5, 4, 2 (850, 1700/2100 (AWS), 1900); HSPA 5.76[UL]/7.2[DL] Mbps
Packet Data: TCP/IP, UDP/IP
SMS: PDU mode
LTE Cat 1 EU with 3G and 2G Fallback
LTE EU: Bands 1, 3, 8, 20. 28 (700, 800, 900, 1800, 2100 MHz), data rates: 10.2[DL] / 5.2[UL] Mbps
3G EU: UMTS Bands 1, 8 (900, 2100 MHz); HSPA
5.76[UL]/7.2[DL] Mbps
2G EU: GSM 900, 1800 MHz; GPRS: 24[UL]/48[DL] Kbps
SIM: Internal, Micro Sim, replaceable, 1.8/3V
Optional SIM on chip
Remote PIN code management
Antenna: Internal, multi-band antenna
GNSS  
Technology: Internal module, CSR SiRFstarV™ based
GPS and GLONSS supported
Sensitivity (tracking): -165dBm
Acquisition (normal): Cold <27 Sec, Warm<10 Sec, Hot<1 Sec
Antenna: Internal, on board patch antenna
Inputs & Outputs  
I/O: Two configurable ports supporting true GPIO (General Purpose Input Output). Each I/O port supports:
• Discrete Dry Input
• Discrete Wet Input
• Analog 0-2.5V Input
• Analog 0-30V Input
• Frequency Counter Input
• Output
• Discrete Dry – Ground sensing. Configurable ground threshold
• Discrete Wet – Logic 1 and 0 configurable thresholds
Analog inputs with variable resolution:
• 8bit - 0-2.5V: 20mV resolution, accuracy ±30mV;
• 8bit - 0-30V: 100mV resolution, accuracy ±100mV
• 12bit - 0-2.5V: 3mV resolution, worst case accuracy <10mV; max 20mV.
• 12bit - 0-30V: 8mV resolution, worst case accuracy <40mV
Frequency counters – Up to 5kHz input signal; Signal level (3V < Vin ≤ 30V); Accuracy ±2%
Output - Open collector
Interfaces  
COM port: Cellocator Serial Protocol
Debug, Configuration, FW upgrade
RS232, CMOS levels
3D Accelerometer: 3D, ±8g range, 12 Bit representation, 4mg resolution
Movement detection
MMI: 2 dual colored LED status indication
Activation / Distress button
Tamper switch
Wireless: 2.4 GHz proprietary wireless interface
for MultiSense/CelloSense integration
Connectors: CelloTrack Standalone - 6 pin Molex, Automotive

CelloTrack Power - Pigtail
Power  
Input voltage: CelloTrack Standalone - 4.2V 1A CCCV Charger
CelloTrack Power - 9-32V DC
Internal Battery: Li-Polymer, 3.7V, 5.3Ah, rechargeable
Environment  
Temp, operating: Discharging: -30°C – 70°C
Charging: -20°C – 60°C
Temp, storage: -20°C – 60°C
Humidity: 95% non-condensing
Ingress Protection: IP67
Vibration, Impact, Humidity, chemical: ISO 16750 parts 3 & 4
Mounting: Magnetic or screw mounted cradle Tampering detection
Regulatory Compliance / Certification  
CE: CE Safety EN60950 1:2001+A11:2004
FCC: Part 15 Subpart B, part 22/24 compliant
IC: ICES-003, Issue 5:2012 Class B.
CAN/CSA-CEI/IEC CISPR 22:10
PTCRB: TRP, TIS, Spurious and harmonics emission
AT&T: Yes
Environment: ISO 16750 part 3 & 4
UL: Compliant
Reliability Assessment: Annual Failed Ratio <0.5%
RoHS and Conflict Minerals: Compliant
Dimensions & Weight  
Dimensions: ~155mm x 81mm x 45mm
Weight: CelloTrack Standalone ~ 330gr
CelloTrack Power ~ 370gr
Enclosure Material: Polycarbonate
MultiSense

The MultiSense is an innovative, smart and compact monitoring device, which includes a range of internal embedded sensors that can sense temperature, relative humidity, light, impact, movement, orientation change, magnetic (door/window open/close status), and more.

These sensors play a big role in reducing risk and exposure to losses, in turn bringing peace of mind to customers.

Learn More about MultiSense

CelloSense

The CelloSense is a smart, low maintenance monitoring device featuring extended range and a rugged IP69K enclosure for outdoor durability and long operating life in harsh conditions. It utilizes BLE technology to communicate with Cellocator’s line of asset products, or any other hub that supports BLE communication (smartphones, tablets, and OEM hubs). The CelloSense not only tracks assets, but also monitors the environment and conditions in which the asset is currently located or handled via temperature, movement/impact, and magnetic (doors closing/opening) internal sensors.

Learn More about CelloSense

Fuel Level Sensor

The Fuel Level Sensor measures the fuel level in the vehicle tank. Supports all vehicles that utilize a resistive floating buoy and vehicles with or without a voltage regulator.

Learn More about Fuel Level Sensor

Fuel Cap Protector

The Fuel Cap Protector decreases the possibility of fuel theft by disabling access to the fuel tank when closed, and reporting on fuel cap openings via the unit’s digital input.

Learn More about Fuel Cap Protector

Analog Temperature Sensor

The Analog Temperature Sensor is available in 5m and 20m lengths and connects to the analog input of the Cellocator unit. Temperature range: -40ºC to +75ºC.

Learn More about Analog Temperature Sensor

Door Sensor

The Cellocator Door Sensor is a massive and rugged device used to detect the opening of doors, especially in container/trailer applications. The Door Sensor can be used with any Cellocator device equipped with a digital input.

Learn More about Door Sensor

  • Specs

    LTE Cat 1 NA with 3G Fallback
    LTE NA: Bands 2, 4, 5, 12 (700, 850, 1700/2100 (AWS), 1900 MHz),
    data rates: 10.2[DL] / 5.2[UL] Mbps
    3G NA: UMTS Bands 5, 4, 2 (850, 1700/2100 (AWS), 1900); HSPA 5.76[UL]/7.2[DL] Mbps
    Packet Data: TCP/IP, UDP/IP
    SMS: PDU mode
    LTE Cat 1 EU with 3G and 2G Fallback
    LTE EU: Bands 1, 3, 8, 20. 28 (700, 800, 900, 1800, 2100 MHz), data rates: 10.2[DL] / 5.2[UL] Mbps
    3G EU: UMTS Bands 1, 8 (900, 2100 MHz); HSPA
    5.76[UL]/7.2[DL] Mbps
    2G EU: GSM 900, 1800 MHz; GPRS: 24[UL]/48[DL] Kbps

    Internal, Micro Sim, replaceable, 1.8/3V
    Optional SIM on chip
    Remote PIN code management

    Internal, multi-band antenna

    Internal module, CSR SiRFstarV™ based
    GPS and GLONSS supported

    -165dBm

    Cold <27 Sec, Warm<10 Sec, Hot<1 Sec

    Internal, on board patch antenna

    Two configurable ports supporting true GPIO (General Purpose Input Output). Each I/O port supports:
    • Discrete Dry Input
    • Discrete Wet Input
    • Analog 0-2.5V Input
    • Analog 0-30V Input
    • Frequency Counter Input
    • Output
    • Discrete Dry – Ground sensing. Configurable ground threshold
    • Discrete Wet – Logic 1 and 0 configurable thresholds
    Analog inputs with variable resolution:
    • 8bit - 0-2.5V: 20mV resolution, accuracy ±30mV;
    • 8bit - 0-30V: 100mV resolution, accuracy ±100mV
    • 12bit - 0-2.5V: 3mV resolution, worst case accuracy <10mV; max 20mV.
    • 12bit - 0-30V: 8mV resolution, worst case accuracy <40mV
    Frequency counters – Up to 5kHz input signal; Signal level (3V < Vin ≤ 30V); Accuracy ±2%
    Output - Open collector

    Cellocator Serial Protocol
    Debug, Configuration, FW upgrade
    RS232, CMOS levels

    3D, ±8g range, 12 Bit representation, 4mg resolution
    Movement detection

    2 dual colored LED status indication
    Activation / Distress button
    Tamper switch

    2.4 GHz proprietary wireless interface
    for MultiSense/CelloSense integration

    CelloTrack Standalone - 6 pin Molex, Automotive

    CelloTrack Power - Pigtail

    CelloTrack Standalone - 4.2V 1A CCCV Charger
    CelloTrack Power - 9-32V DC

    Li-Polymer, 3.7V, 5.3Ah, rechargeable

    Discharging: -30°C – 70°C
    Charging: -20°C – 60°C

    -20°C – 60°C

    95% non-condensing

    IP67

    ISO 16750 parts 3 & 4

    Magnetic or screw mounted cradle Tampering detection

    CE Safety EN60950 1:2001+A11:2004

    Part 15 Subpart B, part 22/24 compliant

    ICES-003, Issue 5:2012 Class B.
    CAN/CSA-CEI/IEC CISPR 22:10

    TRP, TIS, Spurious and harmonics emission

    Yes

    ISO 16750 part 3 & 4

    Compliant

    Annual Failed Ratio <0.5%

    Compliant

    ~155mm x 81mm x 45mm

    CelloTrack Standalone ~ 330gr
    CelloTrack Power ~ 370gr

    Polycarbonate

  • Accessories
    • MultiSense
      MultiSense

      The MultiSense is an innovative, smart and compact monitoring device, which includes a range of internal embedded sensors that can sense temperature, relative humidity, light, impact, movement, orientation change, magnetic (door/window open/close status), and more.

      These sensors play a big role in reducing risk and exposure to losses, in turn bringing peace of mind to customers.

    • CelloSense
      CelloSense

      The CelloSense is a smart, low maintenance monitoring device featuring extended range and a rugged IP69K enclosure for outdoor durability and long operating life in harsh conditions. It utilizes BLE technology to communicate with Cellocator’s line of asset products, or any other hub that supports BLE communication (smartphones, tablets, and OEM hubs). The CelloSense not only tracks assets, but also monitors the environment and conditions in which the asset is currently located or handled via temperature, movement/impact, and magnetic (doors closing/opening) internal sensors.

    • Fuel Level Sensor
      Fuel Level Sensor

      The Fuel Level Sensor measures the fuel level in the vehicle tank. Supports all vehicles that utilize a resistive floating buoy and vehicles with or without a voltage regulator.

    • Fuel Cap Protector
      Fuel Cap Protector

      The Fuel Cap Protector decreases the possibility of fuel theft by disabling access to the fuel tank when closed, and reporting on fuel cap openings via the unit’s digital input.

    • Analog Temperature Sensor
      Analog Temperature Sensor

      The Analog Temperature Sensor is available in 5m and 20m lengths and connects to the analog input of the Cellocator unit. Temperature range: -40ºC to +75ºC.

    • Door Sensor
      Door Sensor

      The Cellocator Door Sensor is a massive and rugged device used to detect the opening of doors, especially in container/trailer applications. The Door Sensor can be used with any Cellocator device equipped with a digital input.

  • Applications
  • Relevant Documents
  • Knowledge Base

    Coming Soon