Fuel Probe Sensor

Measures Fuel Volume in Fuel containers & Vehicles' Tanks

The Cellocator Fuel Probe Sensor is used to accurately measure the fuel volume in fuel containers and vehicles' tanks. The sensor helps the service provider to measure the actual fuel volume in the tank and thus to provide dynamic fuel consumption data including the volume, time and location of refueling and draining (theft).

  • Includes a probe (available in various lengths for different fuel tank dimensions) which is immersed into the fuel, and a measuring head which is mounted on the fuel tank.
  • The sensor is connected via an interface cable to the Cellocator unit pulse counter
  • Calibration is achieved via the Fuel Sensor Manager application
General  
Maximum allowed value of electrical conductivity of measured fuel : Units: Cm/m
Value: 10(−8)
Notes: Allows measuring different sorts of fuel with high electrical conductivity (which contain anti-electrostatic additives).
Range of operating temperature: Units: °C
Value: – 40 to + 75
Ingress Protection Marking: Value: IP56
Measurement  
Range of measured values of the fuel level for 800 mm probe: Units: mm
Value: 10 to 800
Notes: The position of the upper (maximum) value of the measured level corresponds to the upper edge of the drain holes in the plastic cover of the probe.
Minimum measured values of the fuel level for probes longer than 800 mm: Units: mm
Value: 800
Notes: The position of the upper (maximum) value of the measured level corresponds to the upper edge of the drain holes in the plastic cover of the probe.
Minimum resolution of measurement of diesel fuel level in static mode: Units: mm
Value: 0.05
Notes: For 16 bit representations of measurement results.
Maximum error in level measuring in static mode: Units: mm
Value: 0.5
Notes: For 800 mm probe in normal climatic conditions.
Programmable averaging Period of measurement results on dynamic mode: Units: s
Value: 0…32
Number of Bits representation of measurement results: Units: bit
Value: 10/12/16 for fuel level ; 8 for Temperature
Notes: Number of bits representation is configurable via the Fuel Level Manager. It should be set to 12, which is also the default value.
Supply  
Voltage supply, operating range: Units: V
Value: +8 -10% ÷ +36 +20%
Current consumption: Units: мА
Value: 6±0,5 (with 12V)
Value: 3±0,2 (with 24V)
Operating mode: Value: Long-term
Immunity to surge pulses on the power circuit.: Value:
+ 160V, 1 sec
-1000V, 1 msec
Interface  
Digital communication interface: Value: RS-232
frequency: Units: Hz
Value: 500 - 1500
Accession size, weight  
Flange holes characteristics: Value: 5 holes. Ø4.5mm
probe’s thread: Value: M25х1.5
Maximum height of measuring head above surface of tank, including flange: Units: mm
Value: 29
Notes: Does not include gasket
Maximum weight: Units: g
Value: 250
CR-300

The Cellocator CR300B is Cellocator’s entry-level unit for fleet management and vehicle security applications, available in 2G / 3G modem variants.

The CR300B is equipped with a rechargeable backup battery (1000mAh) and GSM jamming detection algorithms for improved compliance with vehicle security applications.

Cello-IQ

Advanced Fleet Management Solution with Driver Behavior Monitoring

Cello-IQ is a driver behavior monitoring and eco-driving device, designed to reduce fleet operating costs, improve productivity and increase fleet safety. The Cello-IQ processes and interprets vehicle dynamics and driving patterns into a safety score, which reflects the driver’s potential of involvement in a road accident, and an Eco score, indicating the vehicle’s fuel efficiency and emission footprint.

Cello-CANiQ

Intelligent Fleet Management, Driver Behavior & Diagnostics Solution

A fleet management solution, utilizing a smart algorithm to combine data from various vehicle environment interfaces. These interfaces include standard CANBUS and OBD, driver identification, serial communication with third party devices, discrete, analog and frequency measurement ports, voice channel, and others. In addition to various logic methods calculating Trip Fuel Consumption, based on different vehicle’s parameters.

  • Specs

    Units: Cm/m
    Value: 10(−8)
    Notes: Allows measuring different sorts of fuel with high electrical conductivity (which contain anti-electrostatic additives).

    Units: °C
    Value: – 40 to + 75

    Value: IP56

    Units: mm
    Value: 10 to 800
    Notes: The position of the upper (maximum) value of the measured level corresponds to the upper edge of the drain holes in the plastic cover of the probe.

    Units: mm
    Value: 800
    Notes: The position of the upper (maximum) value of the measured level corresponds to the upper edge of the drain holes in the plastic cover of the probe.

    Units: mm
    Value: 0.05
    Notes: For 16 bit representations of measurement results.

    Units: mm
    Value: 0.5
    Notes: For 800 mm probe in normal climatic conditions.

    Units: s
    Value: 0…32

    Units: bit
    Value: 10/12/16 for fuel level ; 8 for Temperature
    Notes: Number of bits representation is configurable via the Fuel Level Manager. It should be set to 12, which is also the default value.

    Units: V
    Value: +8 -10% ÷ +36 +20%

    Units: мА
    Value: 6±0,5 (with 12V)
    Value: 3±0,2 (with 24V)

    Value: Long-term

    Value:
    + 160V, 1 sec
    -1000V, 1 msec

    Value: RS-232

    Units: Hz
    Value: 500 - 1500

    Value: 5 holes. Ø4.5mm

    Value: M25х1.5

    Units: mm
    Value: 29
    Notes: Does not include gasket

    Units: g
    Value: 250

  • Related Products
    • CR-300
      CR-300

      The Cellocator CR300B is Cellocator’s entry-level unit for fleet management and vehicle security applications, available in 2G / 3G modem variants.

      The CR300B is equipped with a rechargeable backup battery (1000mAh) and GSM jamming detection algorithms for improved compliance with vehicle security applications.

    • Cello-IQ
      Cello-IQ

      Advanced Fleet Management Solution with Driver Behavior Monitoring

      Cello-IQ is a driver behavior monitoring and eco-driving device, designed to reduce fleet operating costs, improve productivity and increase fleet safety. The Cello-IQ processes and interprets vehicle dynamics and driving patterns into a safety score, which reflects the driver’s potential of involvement in a road accident, and an Eco score, indicating the vehicle’s fuel efficiency and emission footprint.

    • Cello-CANiQ
      Cello-CANiQ

      Intelligent Fleet Management, Driver Behavior & Diagnostics Solution

      A fleet management solution, utilizing a smart algorithm to combine data from various vehicle environment interfaces. These interfaces include standard CANBUS and OBD, driver identification, serial communication with third party devices, discrete, analog and frequency measurement ports, voice channel, and others. In addition to various logic methods calculating Trip Fuel Consumption, based on different vehicle’s parameters.

  • Applications
  • Relevant Documents
  • Knowledge Base