CTR

Cellocator Temperature/Humidity Recorder

Cellocator Temperature/ Humidity Recorder (CTR / CTHR) provides Temperature and Humidity logging, exporting and printing and online monitoring capabilities, in addition to providing alarms in real time.

  • Up to 4 input channels of temperature, humidity and events (switches).
  • Records, saves and prints up to 16,200 readings.
  • Sends the recorded data via its RS232 interface to the Cellocator unit which is then forwarded to the control center application, allowing online monitoring of the sensors.
  • Ensures that information is saved even when cellular communication is lost for long periods.
  • Sounds an alarm whenever the measured value goes above or below a defined range, or whenever the Event (switch) changes its position.
  • EN12830 compliant.
 
Measurement Range: CTR : -40°/ +266°F (-40°/ +130°C)
CTHR : -40°/ +185°F (-40°/ +85°C) 0-100% RH
Temp. Measurement Accuracy: CTR : ± 1.0°F (+/- 0.5°C)
CTHR : ± 1.0°F (± 0.5°C)
Humidity Measurement Accuracy: CTR : Not applicable
CTHR : In range of 10.0 - 89.9% RH: ± 2% RH, else: ± 4% RH
Ambient Operating Range: 0°F to +150°F (-18°C to +65°C), 0 to 95% RH non-condensing
Measurement Resolution: CTR : 0.2°F (0.1°C)
CTHR : 0.2°F (0.1°C), 0.1% RH
Storage Temperature Range : -40°F to +185°F (-40°C to +85°C) without the Thermal Paper
-40°F to +150°F (-40°C to +65°C) with the Thermal Paper
Sensor Diameter: CTR : 0.25 inches (6.35 mm)
CTHR : 0.55 inches (14 mm)
Sensor Cord Length : CTR : 33 feet (10 m)
CTHR : 33 feet (10 m)
Alarm Contact Rating: 1 Amps, 12V AC/DC
Chart Paper Width and Length: Thermal Chart Paper , 2 inches (50.8 cm), 131 feet (40 m)
Chart Paper Width and Length: Numeric, 4 characters
Power consumption: 12Vac/dc, 1550 mA while printing, 100 mA without printing
Battery Backup: 9V battery, logs up to 50 hours (not supplied)
Clock Battery Life: 3.6V Lithium battery, two years in average use (supplied)
Repeatability: CTR : ± 0.2°F (± 0.1°C)
CTHR : Temp.: ± 0.2°F (± 0.1°C)
Humidity: in range of : 10.0-89.9%RH: ±0.1%RH
Humidity in other: ± 0.5%RH
Response Time: CTR : Temp.:5-30 sec. Event:1 sec.
CTHR : Temp.:5-30 sec. Event: 1 sec. Humidity: 6-10 sec.
Size and Weight without sensors: 8.2x5.3x2.7 inches (208.6x135x69mm), 4 lbs. (1.8 Kg)
Certification: EN12830
ISO 9001:2000
RoHS
CE
FCC
CR-300

The Cellocator CR300B is Cellocator’s entry-level unit for fleet management and vehicle security applications, available in 2G / 3G modem variants.

The CR300B is equipped with a rechargeable backup battery (1000mAh) and GSM jamming detection algorithms for improved compliance with vehicle security applications.

*Must have RS232 to TTL adapter

Cello-IQ

Advanced Fleet Management Solution with Driver Behavior Monitoring

Cello-IQ is a driver behavior monitoring and eco-driving device, designed to reduce fleet operating costs, improve productivity and increase fleet safety. The Cello-IQ processes and interprets vehicle dynamics and driving patterns into a safety score, which reflects the driver’s potential of involvement in a road accident, and an Eco score, indicating the vehicle’s fuel efficiency and emission footprint.

Cello-CANiQ

Intelligent Fleet Management, Driver Behavior & Diagnostics Solution

A fleet management solution, utilizing a smart algorithm to combine data from various vehicle environment interfaces. These interfaces include standard CANBUS and OBD, driver identification, serial communication with third party devices, discrete, analog and frequency measurement ports, voice channel, and others. In addition to various logic methods calculating Trip Fuel Consumption, based on different vehicle’s parameters.

  • Specs

    CTR : -40°/ +266°F (-40°/ +130°C)
    CTHR : -40°/ +185°F (-40°/ +85°C) 0-100% RH

    CTR : ± 1.0°F (+/- 0.5°C)
    CTHR : ± 1.0°F (± 0.5°C)

    CTR : Not applicable
    CTHR : In range of 10.0 - 89.9% RH: ± 2% RH, else: ± 4% RH

    0°F to +150°F (-18°C to +65°C), 0 to 95% RH non-condensing

    CTR : 0.2°F (0.1°C)
    CTHR : 0.2°F (0.1°C), 0.1% RH

    -40°F to +185°F (-40°C to +85°C) without the Thermal Paper
    -40°F to +150°F (-40°C to +65°C) with the Thermal Paper

    CTR : 0.25 inches (6.35 mm)
    CTHR : 0.55 inches (14 mm)

    CTR : 33 feet (10 m)
    CTHR : 33 feet (10 m)

    1 Amps, 12V AC/DC

    Thermal Chart Paper , 2 inches (50.8 cm), 131 feet (40 m)

    Numeric, 4 characters

    12Vac/dc, 1550 mA while printing, 100 mA without printing

    9V battery, logs up to 50 hours (not supplied)

    3.6V Lithium battery, two years in average use (supplied)

    CTR : ± 0.2°F (± 0.1°C)
    CTHR : Temp.: ± 0.2°F (± 0.1°C)
    Humidity: in range of : 10.0-89.9%RH: ±0.1%RH
    Humidity in other: ± 0.5%RH

    CTR : Temp.:5-30 sec. Event:1 sec.
    CTHR : Temp.:5-30 sec. Event: 1 sec. Humidity: 6-10 sec.

    8.2x5.3x2.7 inches (208.6x135x69mm), 4 lbs. (1.8 Kg)

    EN12830
    ISO 9001:2000
    RoHS
    CE
    FCC

  • Related Products
    • CR-300
      CR-300

      The Cellocator CR300B is Cellocator’s entry-level unit for fleet management and vehicle security applications, available in 2G / 3G modem variants.

      The CR300B is equipped with a rechargeable backup battery (1000mAh) and GSM jamming detection algorithms for improved compliance with vehicle security applications.

      *Must have RS232 to TTL adapter

    • Cello-IQ
      Cello-IQ

      Advanced Fleet Management Solution with Driver Behavior Monitoring

      Cello-IQ is a driver behavior monitoring and eco-driving device, designed to reduce fleet operating costs, improve productivity and increase fleet safety. The Cello-IQ processes and interprets vehicle dynamics and driving patterns into a safety score, which reflects the driver’s potential of involvement in a road accident, and an Eco score, indicating the vehicle’s fuel efficiency and emission footprint.

    • Cello-CANiQ
      Cello-CANiQ

      Intelligent Fleet Management, Driver Behavior & Diagnostics Solution

      A fleet management solution, utilizing a smart algorithm to combine data from various vehicle environment interfaces. These interfaces include standard CANBUS and OBD, driver identification, serial communication with third party devices, discrete, analog and frequency measurement ports, voice channel, and others. In addition to various logic methods calculating Trip Fuel Consumption, based on different vehicle’s parameters.

  • Applications
  • Relevant Documents
  • Knowledge Base