CFE

Cellocator Communication & Functionality Expander

Cellocator CFE is an extension device that can be connected to the RS232 serial port of the Cello unit in order to increase the number of available inputs, outputs and serial communication ports.

  • Supports additional three serial ports, six inputs and six outputs.
  • Each serial port can be configured to support one of the legacy serial protocols.
  • Each input supports digital, analog and frequency counter interface.
  • Supports OTA programming and firmware upgrades via serial port.
Interfaces  
Inputs: 6 General purpose inputs supporting:
1) Discrete Dry
2) Discrete Wet
3) Analog 0-2.5V
4) Analog 0-30V
5) Frequency

Discrete Dry – configurable threshold to decide logical high and low states.
Discrete wet - configurable threshold to decide logical high and low states.
Analog inputs with variable resolution -
8 bits & 0-2.5V: resolution 20mV, accuracy ±30mV;
8 bits & 0-30V: 100mV, accuracy ±100mV
12 bits & 0-2.5V: resolution 3mV, worst case accuracy <10mV; max 20mV.
12bits & 0-30V: resolution 8mV,worst case accuracy <40mV
Frequency counters - Configurable resolution; Up to 5kHz input signal; Signal level (3V < Vin ≤ 30V); Accuracy ±2%
Outputs: 6 general purpose open drain outputs (250mA max) with assignable functionality
COM1 (RS232) Port : 8 bit; 1 Stop Bit; No Parity
baud rate – 460800 bps
CFE Connected to Cello:
1 – CFE to Cello communication protocol.
CFE in Standalone mode:
1 - CFE Cellocator Serial Protocol
2 - CFE Configuration
3 - CFE Firmware upgrade
COM3, COM4, COM5 (RS232) port: Selectable baud rate (9600 to 460800 bps)
True RS232 levels
8 bit; 1 Stop Bit; No Parity
configurable protocol:
1. CFE Cellocator Serial Protocol
2. Garmin
3. PSP
4. Transparent Model
applications:
1. CFE and Cello Configuration
2. CFE and Cello Firmware upgrade
Data Forwarding throughput of 3 ports communicating with remote server - 3.7 Kbps
Vout: 5 Volts regulated power supply (300 mA max) output with over current protection.
Connectors: 20pin Molex, Automotive
6 pin Molex, Automotive
Mounting: Tie-wraps and/or two sided adhesive tape
Power  
Input Voltage: 9-32VDC
Average Current consumption: Normal (assuming 0.5 Sec polling): 10.3mA
Hibernation (UART On, assuming 0.5 Sec polling) : 1.5mA
Hibernation (UART Off) : 1.4mA
Vehicle environment immunity  
Immunity: Compliant with ISO 7637 test level
#4 (in accordance with e-mark directive)
Environment  
Temp, operating: -40°C to +85°C
Temp, storage: -40°C to +85°C
Humidity: 95% non condensing
Protection: IP40
Vibration, Impact: ISO 16750
Dimensions & Weight  
Dimensions: 98x71x27mm
Weight: 70gr
Cello-IQ

Advanced Fleet Management Solution with Driver Behavior Monitoring

Cello-IQ is a driver behavior monitoring and eco-driving device, designed to reduce fleet operating costs, improve productivity and increase fleet safety. The Cello-IQ processes and interprets vehicle dynamics and driving patterns into a safety score, which reflects the driver’s potential of involvement in a road accident, and an Eco score, indicating the vehicle’s fuel efficiency and emission footprint.

Cello-CANiQ

Intelligent Fleet Management, Driver Behavior & Diagnostics Solution

A fleet management solution, utilizing a smart algorithm to combine data from various vehicle environment interfaces. These interfaces include standard CANBUS and OBD, driver identification, serial communication with third party devices, discrete, analog and frequency measurement ports, voice channel, and others. In addition to various logic methods calculating Trip Fuel Consumption, based on different vehicle’s parameters.

More info about Cello-CANiQ

  • Specs

    6 General purpose inputs supporting:
    1) Discrete Dry
    2) Discrete Wet
    3) Analog 0-2.5V
    4) Analog 0-30V
    5) Frequency

    Discrete Dry – configurable threshold to decide logical high and low states.
    Discrete wet - configurable threshold to decide logical high and low states.
    Analog inputs with variable resolution -
    8 bits & 0-2.5V: resolution 20mV, accuracy ±30mV;
    8 bits & 0-30V: 100mV, accuracy ±100mV
    12 bits & 0-2.5V: resolution 3mV, worst case accuracy <10mV; max 20mV.
    12bits & 0-30V: resolution 8mV,worst case accuracy <40mV
    Frequency counters - Configurable resolution; Up to 5kHz input signal; Signal level (3V < Vin ≤ 30V); Accuracy ±2%

    6 general purpose open drain outputs (250mA max) with assignable functionality

    8 bit; 1 Stop Bit; No Parity
    baud rate – 460800 bps
    CFE Connected to Cello:
    1 – CFE to Cello communication protocol.
    CFE in Standalone mode:
    1 - CFE Cellocator Serial Protocol
    2 - CFE Configuration
    3 - CFE Firmware upgrade

    Selectable baud rate (9600 to 460800 bps)
    True RS232 levels
    8 bit; 1 Stop Bit; No Parity
    configurable protocol:
    1. CFE Cellocator Serial Protocol
    2. Garmin
    3. PSP
    4. Transparent Model
    applications:
    1. CFE and Cello Configuration
    2. CFE and Cello Firmware upgrade
    Data Forwarding throughput of 3 ports communicating with remote server - 3.7 Kbps

    5 Volts regulated power supply (300 mA max) output with over current protection.

    20pin Molex, Automotive
    6 pin Molex, Automotive

    Tie-wraps and/or two sided adhesive tape

    9-32VDC

    Normal (assuming 0.5 Sec polling): 10.3mA
    Hibernation (UART On, assuming 0.5 Sec polling) : 1.5mA
    Hibernation (UART Off) : 1.4mA

    Compliant with ISO 7637 test level
    #4 (in accordance with e-mark directive)

    -40°C to +85°C

    -40°C to +85°C

    95% non condensing

    IP40

    ISO 16750

    98x71x27mm

    70gr

  • Related Products
    • Cello-IQ
      Cello-IQ

      Advanced Fleet Management Solution with Driver Behavior Monitoring

      Cello-IQ is a driver behavior monitoring and eco-driving device, designed to reduce fleet operating costs, improve productivity and increase fleet safety. The Cello-IQ processes and interprets vehicle dynamics and driving patterns into a safety score, which reflects the driver’s potential of involvement in a road accident, and an Eco score, indicating the vehicle’s fuel efficiency and emission footprint.

    • Cello-CANiQ
      Cello-CANiQ

      Intelligent Fleet Management, Driver Behavior & Diagnostics Solution

      A fleet management solution, utilizing a smart algorithm to combine data from various vehicle environment interfaces. These interfaces include standard CANBUS and OBD, driver identification, serial communication with third party devices, discrete, analog and frequency measurement ports, voice channel, and others. In addition to various logic methods calculating Trip Fuel Consumption, based on different vehicle’s parameters.

      More info about Cello-CANiQ

  • Applications
  • Relevant Documents
  • Knowledge Base