Analog Temperature Sensor

Connects to the Analog Input Port of the Cellocator Unit

The Analog Temperature Sensor can be connected to the analog input port of the Cellocator unit to provide a low-cost, easy to install solution for the cold chain transportation market.

  • Available in 5m and 20m lengths
  • Temperature range: -40ºC to +75ºC.
  • Maximum error range of ±2 ºC (when integrated with a Cellocator unit).
  • Weather-proof, supporting rapid thermal response to changing conditions.
  • No calibration is required.
  • Supports 12/24V power supply and has built-in protection against reverse polarity feed and electrical disturbances in the vehicle environment.
 
Supply Voltage: Min: 8
Max: 31
Units: V
Continuous extended VDC supply: Max: 80
Units: V
Supply Current: Min: 0.6 @8V
Max: 3.6 @31V
Units: mA
Temperature range: Min: -40
Max: +75
Units: °C
Output short-circuit current: Max: 2.5
Units: mA
Maximum voltage on Vout: Max: 2.5
Units: V
Temperature response gradient (depends on thermal conduction): Max: 4
Units: ºC/Min
Measurement error: Typical: ±1
Max: ±2
Units: ºC
Maximum short term (up to 200 microseconds) reverse voltage protection: Max: 600
Units: V
Maximum Spikes as in load dump pulse: Max: 100
Units: V
Temperature voltage output response: Typical: 20
Units: mV/°C
Ingress Protection: IP67
CR-300

The Cellocator CR300B is Cellocator’s entry-level unit for fleet management and vehicle security applications, available in 2G / 3G modem variants.

The CR300B is equipped with a rechargeable backup battery (1000mAh) and GSM jamming detection algorithms for improved compliance with vehicle security applications.

Cello-IQ

Advanced Fleet Management Solution with Driver Behavior Monitoring

Cello-IQ is a driver behavior monitoring and eco-driving device, designed to reduce fleet operating costs, improve productivity and increase fleet safety. The Cello-IQ processes and interprets vehicle dynamics and driving patterns into a safety score, which reflects the driver’s potential of involvement in a road accident, and an Eco score, indicating the vehicle’s fuel efficiency and emission footprint.

Cello-CANiQ

Intelligent Fleet Management, Driver Behavior & Diagnostics Solution

A fleet management solution, utilizing a smart algorithm to combine data from various vehicle environment interfaces. These interfaces include standard CANBUS and OBD, driver identification, serial communication with third party devices, discrete, analog and frequency measurement ports, voice channel, and others. In addition to various logic methods calculating Trip Fuel Consumption, based on different vehicle’s parameters.

CelloTrack (Power Variants)

The CelloTrack product line is designed for advanced asset tracking and remote monitoring, featuring enhanced functionality with full fleet management capabilities, robustness and ease of installation, suitable for a wide variety of asset management applications.

  • Specs

    Min: 8
    Max: 31
    Units: V

    Max: 80
    Units: V

    Min: 0.6 @8V
    Max: 3.6 @31V
    Units: mA

    Min: -40
    Max: +75
    Units: °C

    Max: 2.5
    Units: mA

    Max: 2.5
    Units: V

    Max: 4
    Units: ºC/Min

    Typical: ±1
    Max: ±2
    Units: ºC

    Max: 600
    Units: V

    Max: 100
    Units: V

    Typical: 20
    Units: mV/°C

    IP67

  • Related Products
    • CR-300
      CR-300

      The Cellocator CR300B is Cellocator’s entry-level unit for fleet management and vehicle security applications, available in 2G / 3G modem variants.

      The CR300B is equipped with a rechargeable backup battery (1000mAh) and GSM jamming detection algorithms for improved compliance with vehicle security applications.

    • Cello-IQ
      Cello-IQ

      Advanced Fleet Management Solution with Driver Behavior Monitoring

      Cello-IQ is a driver behavior monitoring and eco-driving device, designed to reduce fleet operating costs, improve productivity and increase fleet safety. The Cello-IQ processes and interprets vehicle dynamics and driving patterns into a safety score, which reflects the driver’s potential of involvement in a road accident, and an Eco score, indicating the vehicle’s fuel efficiency and emission footprint.

    • Cello-CANiQ
      Cello-CANiQ

      Intelligent Fleet Management, Driver Behavior & Diagnostics Solution

      A fleet management solution, utilizing a smart algorithm to combine data from various vehicle environment interfaces. These interfaces include standard CANBUS and OBD, driver identification, serial communication with third party devices, discrete, analog and frequency measurement ports, voice channel, and others. In addition to various logic methods calculating Trip Fuel Consumption, based on different vehicle’s parameters.

    • CelloTrack (Power Variants)
      CelloTrack (Power Variants)

      The CelloTrack product line is designed for advanced asset tracking and remote monitoring, featuring enhanced functionality with full fleet management capabilities, robustness and ease of installation, suitable for a wide variety of asset management applications.

  • Applications
  • Relevant Documents
  • Knowledge Base