1-wire Proximity Reader

External Wireless Front-End for the Cellocator Unit

With a thin and compact enclosure, the 1-wire Proximity Reader serves as an external wireless front-end for the Cellocator unit, providing a wireless driver ID solution with support for proximity cards or tags.

  • Supports Mifare® Classic, Mifare® DESFire, Mifare® Ultralight, Calypso, iClass and NFC cards.
  • Supports 1-WIRE interface (DS1990 emulation).
  • Includes a built-in dual color LED indicator and buzzer.
  • Designed for automotive environment: low power consumption, 12v/24v batteries, immune to vehicle spikes
 
Operating radio frequency: 13,56MHz
Supported standards: MIFARE Classic, Mifare Ultralite C, Mifare DESFire, Calypso, HID iCLASS, NFC
Read range: Up to 10cm (depends on transponder)
Interface: 1-wire
Operating voltage range: 9V to 32V
Average power consumption: 5mA (from 12VDC power supply)
Green LED power consumption: 3mA
Red LED power consumption: 6.5 mA
Working temperature range: -25ºC ÷ +70ºC
Storage temperature range : -40°C to +85°C
Humidity : 95% non-condensing
Dust and water protection: IP50
Dimension: 54mm x 85mm x 7mm
Cord length: 30cm
Connector : Molex 50-57-9404
CR-300

The Cellocator CR300B is Cellocator’s entry-level unit for fleet management and vehicle security applications, available in 2G / 3G modem variants.

The CR300B is equipped with a rechargeable backup battery (1000mAh) and GSM jamming detection algorithms for improved compliance with vehicle security applications.

More info about CR-300

Cello-IQ

Advanced Fleet Management Solution with Driver Behavior Monitoring

Cello-IQ is a driver behavior monitoring and eco-driving device, designed to reduce fleet operating costs, improve productivity and increase fleet safety. The Cello-IQ processes and interprets vehicle dynamics and driving patterns into a safety score, which reflects the driver’s potential of involvement in a road accident, and an Eco score, indicating the vehicle’s fuel efficiency and emission footprint.

More info about Cello-IQ

Cello-CANiQ

Intelligent Fleet Management, Driver Behavior & Diagnostics Solution

A fleet management solution, utilizing a smart algorithm to combine data from various vehicle environment interfaces. These interfaces include standard CANBUS and OBD, driver identification, serial communication with third party devices, discrete, analog and frequency measurement ports, voice channel, and others. In addition to various logic methods calculating Trip Fuel Consumption, based on different vehicle’s parameters.

More info about Cello-CANiQ

  • Specs

    13,56MHz

    MIFARE Classic, Mifare Ultralite C, Mifare DESFire, Calypso, HID iCLASS, NFC

    Up to 10cm (depends on transponder)

    1-wire

    9V to 32V

    5mA (from 12VDC power supply)

    3mA

    6.5 mA

    -25ºC ÷ +70ºC

    -40°C to +85°C

    95% non-condensing

    IP50

    54mm x 85mm x 7mm

    30cm

    Molex 50-57-9404

  • Related Products
    • CR-300
      CR-300

      The Cellocator CR300B is Cellocator’s entry-level unit for fleet management and vehicle security applications, available in 2G / 3G modem variants.

      The CR300B is equipped with a rechargeable backup battery (1000mAh) and GSM jamming detection algorithms for improved compliance with vehicle security applications.

      More info about CR-300

    • Cello-IQ
      Cello-IQ

      Advanced Fleet Management Solution with Driver Behavior Monitoring

      Cello-IQ is a driver behavior monitoring and eco-driving device, designed to reduce fleet operating costs, improve productivity and increase fleet safety. The Cello-IQ processes and interprets vehicle dynamics and driving patterns into a safety score, which reflects the driver’s potential of involvement in a road accident, and an Eco score, indicating the vehicle’s fuel efficiency and emission footprint.

      More info about Cello-IQ

    • Cello-CANiQ
      Cello-CANiQ

      Intelligent Fleet Management, Driver Behavior & Diagnostics Solution

      A fleet management solution, utilizing a smart algorithm to combine data from various vehicle environment interfaces. These interfaces include standard CANBUS and OBD, driver identification, serial communication with third party devices, discrete, analog and frequency measurement ports, voice channel, and others. In addition to various logic methods calculating Trip Fuel Consumption, based on different vehicle’s parameters.

      More info about Cello-CANiQ

  • Applications
  • Relevant Documents
  • Knowledge Base