Additional Accessories

CelloTrack Magnetic Bracket

This bracket allows CelloTrack units to be fixed on steel (iron) surfaces by means of very strong permanent magnets, expanding the flexibility in the placement of units, especially for surveillance, containers and various cargo assets.

 

CFE - Cellocator Communication & Functionality Expander

The Cellocator CFE is a device connected to the serial port of the Cello unit and allows the usage of 3 serial ports and additional 6 inputs and 6 outputs, providing overall support for 12 inputs and 11 outputs. The 6 additional inputs support all types of digital, analog and frequency counter inputs with the identical features and capabilities in the Cello native inputs. The 6 additional outputs support OTA commands for permanent and temporary activation.

CelloFamily & CR 2 Wires Fuse Harness

The harness provides power and ground connectivity only, for self/easy installations. The power wire is connected to a standard size fuse in the drive cabin for quick & easy installation. No ignition input needs to be connected as the user can enable the Movement Start/Stop identification feature in order to detect and report movement status.

CelloFamily & CR 2 Wires Mini Fuse Harness

The harness provides power and ground connectivity only, for self/easy installations. The power wire is connected to a mini size fuse in the driver cabin for quick & easy installation. No ignition input needs to be connected as the user can enable the Movement Start/Stop identification feature in order to detect and report movement status.

 

Cello OBDII Connector - 2 Wires Harness

The harness connects the Cello unit to an OBDII standard connector in the vehicle and provides Vcc and Gnd connectivity only, for self/eas installations. No ignition input needs to be connected as the user can enable the Movement Start/ Stop identification feature in order to detect and report movement status.

 

CelloFamily Waterproof Case

A robust case for the CelloFamily, designed for high-end applications where the Cello-F is exposed to external and harsh weather conditions.

The enclosure is water and dust protected, and internal foam also protects against vibrations and shock. The enclosure is equipped with one PG-7 cable gland, and is also prepared for a second PG-7 cable gland.

The CelloFamily Protector

The CelloFamily Protector is a low cost silicone/ rubber cover for CelloFamily devices, designed to improve the environment and ingress protection of the device from IP40 to IP65, increasing solid- particle-protection from none to Dust-proof and liquid-ingress-protection from Splashing-water to Powerful-water-jets protection.

This dust and water proof solution provides the installer with more flexibility, as the Cello unit can now be installed in vehicle cavities other than the passenger compartment or the trunk.

The CelloFamily Protector is used in conjunction with molded harnesses in order to provide robust protection.

Comments are closed.